Severe Defect Correction Kit (Cutting Compound Kit)
- Maximum correction : Pure Cut with 2× MF Cutting pads tackles severe defects.
- Built-in refine : orange foam included to knock down compound haze.
- DA-ready workflow : fast, controlled passes with predictable wipe-off.
- Plan to finish : add Perfect Polish for true showcar gloss.
Severe swirls and oxidation—handled
The Severe Defect Correction Kit is built for neglected paint: level heavy swirls, oxidation, and RIDS fast with microfiber + Pure Cut, then refine with orange foam to a clear, ready-to-protect finish.
What’s inside
- Pure Cut (16 oz)
- Pads: Microfiber Cutting (ETH-MCP-5) ×2, Orange Foam (ETH-OPP-5) ×1
- Towels: Plush 470 – Gray ×2
Why it works
- Maximum cut from microfiber fiber engagement + Pure Cut’s fast-cutting abrasives.
- Low dust & predictable finish to speed up wipe-off and refinement.
How to use
- Decon wash & clay; tape edges and sensitive trim.
- Cut: Microfiber + Pure Cut, speed 4–5, moderate pressure, short working cycles; wipe.
- Refine: Orange foam + a small amount of Pure Cut (or step to Perfect Polish if desired).
- Panel-wipe; protect with Resist or your ceramic coating.
Good to know
- Do not machine-polish matte/satin finishes or PPF.
- Through-clear scratches likely require touch-up; polishing won’t fully remove them.
Severe swirls and oxidation—handled
The Severe Defect Correction Kit is built for neglected paint: level heavy swirls, oxidation, and RIDS fast with microfiber + Pure Cut, then refine with orange foam to a clear, ready-to-protect finish.
What’s inside
- Pure Cut (16 oz)
- Pads: Microfiber Cutting (ETH-MCP-5) ×2, Orange Foam (ETH-OPP-5) ×1
- Towels: Plush 470 – Gray ×2
Why it works
- Maximum cut from microfiber fiber engagement + Pure Cut’s fast-cutting abrasives.
- Low dust & predictable finish to speed up wipe-off and refinement.
How to use
- Decon wash & clay; tape edges and sensitive trim.
- Cut: Microfiber + Pure Cut, speed 4–5, moderate pressure, short working cycles; wipe.
- Refine: Orange foam + a small amount of Pure Cut (or step to Perfect Polish if desired).
- Panel-wipe; protect with Resist or your ceramic coating.
Good to know
- Do not machine-polish matte/satin finishes or PPF.
- Through-clear scratches likely require touch-up; polishing won’t fully remove them.