One-Step Paint Correction Kit
- One-step swirl removal : erases light–moderate swirls on daily drivers.
- Balanced cut & gloss : Perfect Polish + SmartCell™ foam delivers clear, deep shine.
- Dialed pad combo : two orange pads correct; black pad jewels the finish.
- Clean, DA-friendly work : low dust, easy wipe-off with a 5" setup.
Fast, satisfying correction in a single step
The One-Step Paint Correction Kit is the easiest way to erase light–moderate swirls and boost deep gloss on daily drivers. Pair Perfect Polish with our SmartCell™ foam to correct and finish in one pass on many paints—then swap to the black pad to jewel that last bit of clarity.
What’s inside
- Perfect Polish (16 oz) – low dust, long work time, wipes clean.
- 2 × Orange Polishing Pad – 5" (ETH-OPP-5) – primary one-step cut/finish.
- 1 × Black Finishing Pad – 5" (ETH-BFP-5) – final gloss/jeweling.
- 2 × Plush 470 Towels – Gray – soft, edgeless wipe-off.
Why you’ll love it
- One-step capable on many paints—real correction with a glossy finish.
- DA-friendly (5" backing plate) with stable pad control.
- Low dust & easy wipe-off to keep the job moving.
How to use
- Decon wash & clay. Tape sensitive trim.
- Prime the orange pad, add 3–4 pea-size drops of Perfect Polish.
- Work 2'×2' sections at speed 4–5 with moderate pressure for 2–3 section passes.
- Reduce pressure for a slow, final pass. Wipe clean with a Plush 470 towel.
- Optional: Swap to the black pad with a small amount of polish to jewel.
- Panel-wipe if applying protection; seal with Resist or your coating.
Good to know
- For deeper defects or heavy oxidation, step up to our Two-Step Correction Kit.
- Not for matte/satin paint or PPF. Always test a small area first.
- Clean pads frequently for consistent results.
What it fixes
Light–moderate swirls, washing marring, light haze, and reduced clarity.
| Kit | Correction (Cut) | Finish Gloss | Best For | Primary Pads | Liquids | Typical Steps |
|---|---|---|---|---|---|---|
| ETH-KIT-1STEP-5 | Medium (foam) | High | Daily drivers, light–moderate swirls | Orange + Black foam | Perfect Polish | 1 step (optional jewel) |
| ETH-KIT-2STEP-5 | High → Max | Maximum | Full restorations, moderate–heavy defects | MF + Orange + Black | Pure Cut + Perfect Polish | 2 steps |
| ETH-KIT-1STEP-MF-PC-5 | High (one-step) | Med–High (quick jewel on soft paint) | Harder/neglected paint with limited time | One-Step MF + Black | Pure Cut | 1 step (optional quick finish) |
| ETH-KIT-CPD-5 | Maximum | Medium (refined) | Severe swirls/oxidation, RIDS | MF Cutting + Orange | Pure Cut | 1–1.5 steps (finish recommended) |
| ETH-KIT-FIN-5 | Low | Maximum | Pre-coating jeweling, light haze removal | Black + Orange foam | Perfect Polish | 1 finishing step |
Fast, satisfying correction in a single step
The One-Step Paint Correction Kit is the easiest way to erase light–moderate swirls and boost deep gloss on daily drivers. Pair Perfect Polish with our SmartCell™ foam to correct and finish in one pass on many paints—then swap to the black pad to jewel that last bit of clarity.
What’s inside
- Perfect Polish (16 oz) – low dust, long work time, wipes clean.
- 2 × Orange Polishing Pad – 5" (ETH-OPP-5) – primary one-step cut/finish.
- 1 × Black Finishing Pad – 5" (ETH-BFP-5) – final gloss/jeweling.
- 2 × Plush 470 Towels – Gray – soft, edgeless wipe-off.
Why you’ll love it
- One-step capable on many paints—real correction with a glossy finish.
- DA-friendly (5" backing plate) with stable pad control.
- Low dust & easy wipe-off to keep the job moving.
How to use
- Decon wash & clay. Tape sensitive trim.
- Prime the orange pad, add 3–4 pea-size drops of Perfect Polish.
- Work 2'×2' sections at speed 4–5 with moderate pressure for 2–3 section passes.
- Reduce pressure for a slow, final pass. Wipe clean with a Plush 470 towel.
- Optional: Swap to the black pad with a small amount of polish to jewel.
- Panel-wipe if applying protection; seal with Resist or your coating.
Good to know
- For deeper defects or heavy oxidation, step up to our Two-Step Correction Kit.
- Not for matte/satin paint or PPF. Always test a small area first.
- Clean pads frequently for consistent results.
What it fixes
Light–moderate swirls, washing marring, light haze, and reduced clarity.
| Kit | Correction (Cut) | Finish Gloss | Best For | Primary Pads | Liquids | Typical Steps |
|---|---|---|---|---|---|---|
| ETH-KIT-1STEP-5 | Medium (foam) | High | Daily drivers, light–moderate swirls | Orange + Black foam | Perfect Polish | 1 step (optional jewel) |
| ETH-KIT-2STEP-5 | High → Max | Maximum | Full restorations, moderate–heavy defects | MF + Orange + Black | Pure Cut + Perfect Polish | 2 steps |
| ETH-KIT-1STEP-MF-PC-5 | High (one-step) | Med–High (quick jewel on soft paint) | Harder/neglected paint with limited time | One-Step MF + Black | Pure Cut | 1 step (optional quick finish) |
| ETH-KIT-CPD-5 | Maximum | Medium (refined) | Severe swirls/oxidation, RIDS | MF Cutting + Orange | Pure Cut | 1–1.5 steps (finish recommended) |
| ETH-KIT-FIN-5 | Low | Maximum | Pre-coating jeweling, light haze removal | Black + Orange foam | Perfect Polish | 1 finishing step |