Graphene Matrix Coating
Regular price $99.00
This flexible material is the world’s most advanced and strongest coating. Twice as strong as Kevlar, while being more flexible than Ceramic!
One application creates a durable, permanent bond that provides exceptional long-term protection for 5 or more years, as shown by ASTM Scrubber lab tests.
Incredible hydrophobic properties continuously repel water, dust, dirt, and other contaminants unlike ever before, making washing easier and less frequent.
The nanoparticle Graphene layer leaves a stunningly rich, deepened gloss that drastically enhances the look and shine of your paint.
The Most Advanced Nanotechnology Infused Coating on the Market
Graphene Matrix creates an extremely durable protective coating with superior strength, flexibility and repellency that enhances and maintains vehicle finishes. A revolutionary DIY coating with cutting edge Graphene technology that creates remarkable shine and protects any vehicle effortlessly.
Revolutionary Technology Infused with Graphene
Graphene Matrix utilizes an innovative Graphene Oxide composite that bonds to form an impenetrable layer of protection. Our unique chemistry makes Graphene Matrix easier to install than ever before. Graphene Matrix does not harden or crystallize like normal ceramics, reducing the risk of potentially irreversible high spots or streaking.
5 Years of Protection
Graphene Matrix Coating durability is rated in the years, not months like many spray on “Coatings”. Once applied, Graphene Matrix forms a permanent bond to the finish protecting and repelling contaminants.
Hydrophobic Nanotechnology
Graphene Matrix Coating's unparalleled ability to resist contamination is due to its extremely high surface sheer angle, shedding water and contaminants while reducing the risk of etching, water spotting, and staining. In addition to its resistance to abrasion, weathering, and oxidation, Graphene Matrix Coating creates a layer that forms an almost impenetrable barrier on top of the surface once applied. Future maintenance, such as clay barring and light polishing to repair possible imperfections in the coating, can be performed without sacrificing its integrity, resulting in the ability to finally achieve a near-permanent coating.
How to Prep for Application
-
Clean any loose dust, dirt and contaminants from the surface.
-
Clay bar any rough embedded contaminants from the surface to ensure no impurities interfere with the coatings properties.
-
Polish/Compound to remove any paint defects in the form of scratches, swirl marks and oxidation. Graphene Matrix is a semi permanent coating so once applied any defects will remain sealed underneath.
-
Deep clean any polish oils or residues from the surface that could inhibit the bonding process using Ethos Detox.
Application
Watch Our Full Application Video Here
Graphene Matrix can be applied to any painted, plastic or glass (Including windshield) surface. For most vehicles, one 30ml bottle of Graphene Matrix is more than enough to apply 2 coats. A little bit goes a long way.
How To Apply
Make sure the surface has been completely cleaned and decontaminated with Ethos Detox. The cleaner the surface, the better the bond!
-
Shake bottle well.
-
Apply a few drops of Graphene Matrix onto your applicator until evenly covered.
-
Starting with horizontal / top surfaces first, make sure to apply in an even manner using our coating applicator. Slightly overlap from one line to the next, working in small areas approximately 3’x3’ or the size of a door or half a hood surface at a time.
-
Applicators should glide smoothly on the surface while laying down an even layer of coating. If the applicator starts to drag or the application becomes inconsistent, apply additional drops to the applicator.
-
Immediately after application, you will notice a “Rainbow Effect” (More prevalent on dark colors) while the applied coating bonds to the surface. Temperature and humidity will affect cure time. In most climates, the coating is ready to remove approx. 2-3 minutes after initial application.
-
Using premium microfiber towels (Preferably our Utility Towels), thoroughly wipe down the section to remove the Graphene Coating residue. Your first wipe should remove about 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal.
-
IMPORTANT: Be sure to check adjacent panels to make sure you haven't "pushed" excess coating to other areas. (We recommend using a flashlight or smartphone light for inspection to make sure every bit of residue is gone. If you fail to remove all of the residue, it will become a dark spot once it cures and will require compounding or wet sanding to remove) So be thorough and continue to check your work before moving onto the next step.
-
Repeat these steps as you move along the rest of your vehicle. Coating the paint, plastics, trim and glass surfaces in the same manner.
-
Let the coating dry / cure for at least 24 hours before allowing it to get wet. The longer it stays dry the better, as it will continue to cure for about 5 days (you CAN drive the car during this time). We recommend that you don't wash the car for about a week afterwards.
Important Notes
-
For best care maintenance wash regularly with Ethos Ceramic Shampoo or D3FY
-
Once the bottle of coating is opened, the curing process begins, even if you put the cap back on tightly. Once opened, you should use the coating within one month's time.
-
Please be sure to use all coatings as soon as you can from the time you receive them.
