Ceramic Coating Applicator - 10 Pack
- 12-Pack For Big Jobs : Fresh applicator for every panel or vehicle.
- Built-In Barrier : Keeps coating on the paint, not your fingers.
- Even Coverage : Suede face lays down a consistent layer.
- Coating Ready : Sized for ceramic and graphene application.
- Made for coatings: lays down an even layer of ceramic, graphene or glass coating
- Built-in barrier: keeps coating on the paint, not soaking into the pad or your fingers
- Double-sided: open-loop microfiber on one side, closed-loop on the other
- Flat, medium-firm core: covers more area, great for crosshatching, and conforms to curves
- Sewn-in edges: only soft microfiber touches your paint
The applicator is pretty good. It didn’t absorb as much product as I thought it would which is good. That means I get to apply it to the paint rather than wasted in the applicator.
Complete the kit. Ship it free.
-
This item
Coating Applicator10 Applicators$29.90 -
Detox Panel PrepFinal wipe-down so the coating bonds$25.95 -
Plush 470 Towelsx5 · $5.99 ea$29.95
- Built-in barrier
- Soft microfiber
- Even layer
Even coats.
No high spots.
Drag to compare.
The right tool for coating day
01Less coating wasted
A built-in no-soak barrier keeps coating from wicking into the foam, so the microfiber holds very little. More of your coating ends up on the paint instead of in the sponge.
02Even layers, fewer high spots
A flat, medium-firm core spreads coating smoothly for crosshatch passes and flexes over curves and body lines. Less buildup on the pad means fewer tacky, uneven spots as the coating cures.
03Safe on every finish
Sewn-in edges mean only soft microfiber touches the surface. Use it on paint, glass, wheels and plastic trim with any of our coatings.
Two piles. One pad.
Open-loop on one side, closed-loop on the other, with a no-soak barrier inside so coating stays on the paint, not in the sponge.
- Open-loop pileTaller, open loops grab and spread coating quickly across big panels.
- No-soak barrierA sealed layer between the piles and the foam stops coating from wicking into the sponge, so more of it ends up on the paint.
- Foam coreFlat and medium-firm for even pressure on crosshatch passes, and it flexes over curves and body lines.
- Closed-loop pileShort, tight loops glide smoothly and lay down a thin, even layer on curves and edges.
- Sewn-in edgesStitching sits on the inside, so only soft microfiber touches the paint.
Specs
- Construction
- Dual-pile: open-loop + closed-loop
- Barrier
- Built-in, no-soak
- Core
- Medium-firm foam
- Works with
- Ceramic, graphene & glass coatings
- Reuse
- One coating job per pad
- Sizes
- Standard and large
One applicator, every coating
Use a fresh applicator for each coating job.
Paint
Even crosshatch coats on hoods, roofs and doors.
Graphene & ceramic coatings
Made for our graphene and ceramic coatings.
Glass
Apply EZ Glass in smooth, even passes.
Wheels
Easy to control on wheel faces and spokes.
Plastic trim
Even coats on exterior plastic trim.
Large panels
The large size covers big panels faster.
How to use
Small sections, even passes.
-
Prep the surface: wash, clay and wipe down with Detox so the coating bonds.
-
Shake your coating and apply a few drops to the microfiber face of the applicator.
-
Work one small section at a time in even, overlapping crosshatch passes.
-
Level and buff off with a clean microfiber towel. Use a fresh applicator for your next coating job.
FAQs
Quick answers from the Ethos team.
What is the best way to apply a ceramic coating?
With a dedicated coating applicator. Ours lays down the right amount of coating every time on paint, plastic, glass, wheels and more.
Can I reuse my applicator?
Once coating is on the applicator it starts to cure, so it is best not to reuse it. Keep extras on hand for each coating job.
How do I apply a coating?
One section at a time, with even back and forth passes that overlap from one pass to the next.
Which size should I get?
The standard applicator is great for most cars and for wheels and trim. The large applicator covers big panels faster.
Does it work with any coating?
Yes. Use it for ceramic, graphene and glass coatings, including EZ Glass.
What if I do not love it?
Every Ethos product is backed by a 30-day money-back guarantee.
