Clay Towel - Fine Grade
- Instant Surface Decontamination : Quickly removes embedded contaminants like dirt, tar, sap, and oxidation for a glass-smooth finish.
- Reusable & Durable Design : Outlasts traditional clay bars by 4X, providing consistent performance wash after wash.
- Safe for Multiple Surfaces : Ideal for use on paint, glass, plastic, and trim—perfect for prepping surfaces before ceramic coating or wax application.
- Easy-to-Use Technology : Advanced polymer coating effortlessly glides across surfaces, significantly reducing clay time and effort.
- Clay a whole car in minutes: the 12 × 12 in polymer face covers a panel in a few passes
- Lifts what washing leaves behind: rail dust, tar, tree sap, overspray and brake dust
- Drop it? Rinse it: a clay bar that hits the ground is done. This rinses clean and keeps going
- Reusable: outlasts traditional clay bars 4X
- The step before protection: smooth paint lets RESIST, wax or a graphene coating bond properly
Complete the kit. Ship it free.
-
This item
Clay TowelClay Towel Fine Grade$29.99 -
Detail Spray clay lube16oz · the slick layer clay needs to glide$13.99 -
Iron & Fallout Remover16oz · dissolves iron first, so the towel does less work$16.99 -
Second Clay TowelOne for paint, one for glass and wheels$29.99
-
Plush 470 wipe-down towelBuff off lube residue after each panel$5.99
Smoother paint. Less work.
01Glass-smooth in minutes
A clay bar is the size of your palm. The towel covers a 12 × 12 in patch per pass, so a full car goes from rough to smooth in a fraction of the time.
02No more dropped-clay disasters
Drop a clay bar and it is ruined, grit and all. Drop the towel and you rinse it off and carry on.
03Reusable, not disposable
Rinse it after each panel and after the job. It outlasts traditional clay bars 4X, wash after wash.
04Protection that actually bonds
Wax, spray sealants and coatings bond to clean paint, not to contamination. Clay first and everything you put on after lasts longer.
Improve your decon
- ✓12 × 12 in face covers a panel in a few passes
- ✓Rinse it clean if it hits the ground
- ✓Reusable, outlasts clay bars 4X
- ✓Microfiber backing gives you a firm, even grip
- ✕Palm-sized, one small patch at a time
- ✕Drop it once and it goes in the trash
- ✕Loads up and has to be kneaded and replaced
- ✕Hard to hold flat, easy to press too hard
Lube it. Glide it. Wipe it. Move on.
Safe on every exterior surface
Paint, glass, chrome and trim.
Paint & clear coat
Fine grade polymer lifts bonded grit without cutting into clear coat when used with plenty of lube.
Glass
Pulls water spots and film off windshields and windows before a glass coating.
Chrome & metal
Smooths bumpers, trim pieces and exhaust tips.
Trim & plastics
Safe on exterior trim and plastics, straight-line passes only.
Before a coating
The prep step before RESIST, wax, Ceramic Speed Wax or a graphene coating.
Any clay lube
Works with Detail Spray or soapy wash water.
How to use
Clean paint, lots of lube, light pressure.
-
Wash and rinse the car so no loose dirt is left on the paint.
-
Spray Detail Spray generously on a 2 × 2 ft section. More lube is always better.
-
Glide the towel flat in straight lines with light pressure until it moves freely and quietly.
-
Wipe the panel with a microfiber towel, rinse the clay towel often, then protect the paint.
FAQs
Quick answers from the Ethos team.
What does a clay towel remove?
Bonded contamination that washing leaves behind: rail dust, industrial fallout, tar, tree sap, overspray and brake dust. If paint feels rough through a plastic sandwich bag after washing, it needs clay.
Is a clay towel better than a clay bar?
For most people, yes. It covers more area per pass, gives you an even grip, and can be rinsed and reused, including after a drop. It also lasts about 4X longer than a traditional clay bar.
Do I need a clay lubricant?
Yes. Always use it on a clean, wet surface with plenty of lubrication. Detail Spray works as a clay lube, or you can use soapy wash water. Re-spray every 2 × 2 ft section.
Can it scratch or mar my paint?
Used dry or with heavy pressure, any clay can leave light marring. Keep the surface slick, use light pressure and straight lines, and rinse the towel often. A light polish afterward will remove any haze on soft paint.
Why is it leaving marks or residue?
Usually not enough lube or too much pressure. Re-spray the panel, lighten up, and wipe with a clean microfiber. Rinse the towel if it has loaded up with contamination.
How often should I clay?
Every 4 to 6 months for most daily drivers, and always before applying a wax, sealant or coating.
How do I clean and store it?
Rinse it thoroughly with water after use, let it air dry, and store it clean and dry.
What size is it?
12 × 12 in, a fine grade polymer clay face on a microfiber backing.
What if I don't love it?
Every Ethos product is backed by a 30-day money-back guarantee.
