Microfiber One-Step Paint Correction Kit
- Balanced one-step correction : microfiber pads plus Perfect Polish remove light–moderate swirls fast.
- High clarity finish : finishes glossy on most paints; add a light final pass for extra pop.
- Smart pad combo : 2× One-Step Microfiber to cut, black foam to jewel if needed.
- Clean, DA-friendly workflow : low dust, easy wipe-off, consistent results with a 5" setup.
Microfiber one-step correction—faster cut, glossy finish
The Microfiber One-Step Correction Kit uses our One-Step Microfiber Pad to deliver real correction in a single session. Choose your chemistry:
- Perfect Polish: Best overall one-step on most paints—excellent clarity with surprising cut.
- Pure Cut (Aggressive): More bite for neglected or harder clears; may need an optional quick jeweling pass on softer paints.
What’s inside (5")
- Liquids: Perfect Polish (16 oz)
- Pads: 2 × One-Step Microfiber (ETH-OSP-5), 1 × Black Finishing Foam (ETH-BFP-5)
- Towels: 2 × Plush 470 – Gray
How to use
- Decon wash & clay; tape sensitive edges.
- Prime the MF pad fully, then add 3–4 pea drops. Work 2'×2' sections at speed 4–5.
- 2–3 section passes with moderate pressure; final pass with reduced pressure and slower arm speed; wipe.
- Optional: Use the black foam pad with a small amount of polish to jewel on soft/finicky paint.
Pro tips
- Blow out or brush-clean MF pads every panel to maintain cut and reduce haze.
- Use fewer drops on finishing passes to improve clarity.
- Not for matte/satin paint or PPF.
Microfiber one-step correction—faster cut, glossy finish
The Microfiber One-Step Correction Kit uses our One-Step Microfiber Pad to deliver real correction in a single session. Choose your chemistry:
- Perfect Polish: Best overall one-step on most paints—excellent clarity with surprising cut.
- Pure Cut (Aggressive): More bite for neglected or harder clears; may need an optional quick jeweling pass on softer paints.
What’s inside (5")
- Liquids: Perfect Polish (16 oz)
- Pads: 2 × One-Step Microfiber (ETH-OSP-5), 1 × Black Finishing Foam (ETH-BFP-5)
- Towels: 2 × Plush 470 – Gray
How to use
- Decon wash & clay; tape sensitive edges.
- Prime the MF pad fully, then add 3–4 pea drops. Work 2'×2' sections at speed 4–5.
- 2–3 section passes with moderate pressure; final pass with reduced pressure and slower arm speed; wipe.
- Optional: Use the black foam pad with a small amount of polish to jewel on soft/finicky paint.
Pro tips
- Blow out or brush-clean MF pads every panel to maintain cut and reduce haze.
- Use fewer drops on finishing passes to improve clarity.
- Not for matte/satin paint or PPF.