Clay Mitt - Synthetic Clay Bar For Cars
- 10X Faster Decontamination : Unique hexagon weave and proprietary polymers make decontamination up to 10 times faster than traditional clay bars.
- Versatile Use : Compatible with any clay lubricant like Ethos Detail Spray or Ethos Ceramic Shampoo, making decontamination easy in any wash routine.
- Safe for All Surfaces : The pH-neutral formula is gentle on paint, plastic, glass, and rubber, ensuring a scratch-free finish.
- Reusable & Easy to Clean : Rinse after each use, and it’s ready for the next detailing session.
Quick Decon Clay Mitt - Fast and Effective Paint Decontamination
The Ethos Quick Decon Clay Mitt is the latest evolution in clay bar technology, offering a quicker and easier way to decontaminate your vehicle's surface. This clay bar mitt safely removes dirt, bugs, tree sap, water spots, and other contaminants from paint, glass, plastic, and rubber surfaces. Whether you're prepping for a fresh coat of wax or a ceramic coating, this clay mitt for cars delivers professional results every time.
Why Choose the Quick Decon Clay Mitt?
- 10X Faster Decontamination: The unique hexagon weave technology, combined with our proprietary polymers, allows Quick Decon to work up to 10 times faster than traditional clay bars.
- Versatile Use: Compatible with any clay lubricant, such as Ethos Detail Spray, or a high-quality soap like Ethos Ceramic Shampoo. It makes decontamination a breeze, whether you're using a dedicated lubricant or integrating the mitt into your wash routine.
- Safe for All Surfaces: The clay mitt's pH-neutral formula is gentle yet effective on paint, plastic, glass, and rubber, ensuring a scratch-free finish.
- Reusable and Easy to Clean: Rinse under water after each use, and the Quick Decon Clay Mitt is ready to go for your next detailing session.
How Does it Work?
Our clay weave technology quickly pulls contaminants from the surface without scratching. This is due to our unique hexagon weave infused with our proprietary polymers that have been shown to work up to 10X quicker than a traditional clay bar.
DIRECTIONS TO GET PROFESSIONAL RESULTS WITH YOUR CLAY BAR
Step 1: Thoroughly rinse your vehicle making it free of dust, sand, and dirt.
**Make sure to keep HIGH levels of lubrication at ALL times to avoid marring of the surface.**
Step 2: If using a traditional clay lubricant (We recommend our Detail Spray), apply clay lubricant to make the surface extremely slick and proceed to Step 3. However, if using a soap such as Ceramic Shampoo, begin washing the vehicle with either a foam cannon or by using a wash bucket. With the surface still wet, clean out your wash bucket and add another 2-3 ounces of soap to approximately 1 gallon of water. Then, stick the clay mitt into the bucket so that it is fully wet, and proceed to Step 3.
Step 3: Lightly polish the surface of the vehicle with Quick Decon, applying light pressure, similar to how you would wash the vehicle. Ensure that Quick Decon and the vehicle surface stay wet and lubricated to avoid scratching and marring on the vehicle clear coat. Re-lubricate at minimum every 2' x 2' area. See more notes below.
“IMPORTANT: It bears repeating, make sure to keep a VERY HIGH level of lubrication at ALL times using the Quick Decon - Clay Mitt, with very light pressure, to avoid marring or residue on the surface. Do NOT use the same pressure as you would when washing. A little goes a long way here. Make sure to read all steps below:”
1) Thoroughly rinse the vehicle making it free of dust, sand, and dirt.
2) Use only on a clean and cool surface, out of direct sunlight if possible.
3) The Quick Decon - Clay Mitt should be turned over and rinsed regularly to reduce the risk of removed contamination scratching the paintwork.
4) At a minimum, you should re-lubricate every 2’ x 2’ area of a panel. Be very generous on lubrication throughout the entire process. A good rule of thumb to err on the side of caution is 2-3 oz of soap to approximately 1 gallon of water.
5) When finished, rinse off/pressure wash off thoroughly when done, and store in a cool and dark place.
FAQ
1-2 times a year as a rule. If the paint still feels rough after a thorough wash, it's time.
Yes, with proper lubrication and light pressure. Keep the surface wet and let the mitt do the work.
Any clay lube works — Detail Spray, Ceramic Shampoo suds, or a soap-and-water mix. Never clay dry.
Up to ~100 uses. Rinse it clean between uses — unlike a clay bar, it doesn't load up and get thrown away.
No. Clay removes bonded contamination. Swirls and scratches need polish or compound.
Yes. Claying strips whatever wax or sealant was on the panel. Re-seal with RESIST or a coating.
It's faster and more forgiving — up to 10x quicker — and if you drop it you can rinse it instead of throwing it away.
- Reviews
- Questions
- clay mitt
- paint
- mitt
- products
- Ethos
- big brother
- light swipes
- clay processes
- foamer soap
- grit
I loved how easy it was to use, and how effective it was on my paint.
United States
United StatesAwesome clay that doesn't scratch
With proper lubrication this wont scratch paint and works super fast. I was having trouble getting longevity out of my sealants, so I used iron remover and clayed the car with this mitt and now it is silky smooth and the hydrophobics are much better. You can feel the grit being loosened in 2-3 light swipes with this and finish shine. I was a skeptic of claying a vehicle before this, but I will be doing it much more often because it is so easy and safe with this mitt.
United StatesGreat stuff!!
Awesome mitt, took most of the contaminants off the paint paint pretty easily with the use of the Decon spray. I would definitely recommend one with a small clay bar kit for the hard to get stuff.
United StatesAwesome Product
The clay mitt is so much quicker and easier than regular clay, try it you will not be disappointed!!