For the best application of Ethos EZ Glass Graphene Glass Coating, follow these detailed steps, incorporating the use of Ethos Detox and Ethos Clarity glass cleaner:
- Initial Cleaning: Use Ethos Clarity glass cleaner to thoroughly clean the glass. This step ensures the removal of any surface dirt, grime, or residues.
- Decontamination: After cleaning, apply Ethos Detox to the glass. This product will help in removing any remaining contaminants, providing a truly clean surface for the coating.
- Claying and Polishing: For optimal results, use a clay bar on the glass to eliminate any embedded contaminants that the cleaners may have missed. Follow this with a glass polish to ensure the surface is as smooth and flawless as possible.
- Product Preparation: Shake the Ethos EZ Glass bottle well before use.
- Coating Application: Apply a few drops of the EZ Glass coating onto a microfiber applicator or a suitable applicator pad.
- Even Distribution: Gently spread the coating over the glass in a criss-cross pattern, ensuring full and even coverage. Work in small sections to maintain control over the application.
- No Cure or Flash Time: Unlike some other coatings, Ethos EZ Glass does not require a cure or flash time. This means you can proceed to the next step immediately after application.
Removal and Finishing:
- Buffing Off Excess: Use a clean, high-quality microfiber towel to buff off any excess product from the glass. Ensure that the glass is streak-free and clear.
- Final Inspection: Do a final inspection to make sure all areas are covered and there are no missed spots or streaks.
By following these steps, you'll ensure a high-quality and durable application of the Ethos EZ Glass Graphene Glass Coating, providing your glass surfaces with enhanced clarity and protection.