Graphene Matrix Coating V3.0
- rGO Graphene Technology : real reduced graphene oxide, 40% solids
- Hydrophobic : 115°+ contact angle sheds water and dirt
- 5+ Years of Protection : rated for 1,000+ washes
- Gloss & Slickness : deep candy-shell shine, ultra slick
- Easiest Application Yet : forgiving, first-timer friendly
New: V3.0 takes over from V2.0. Drive in 2 hours.
- High-gloss finish
- Durable Hydrophobics
- Ultra-slick feel
- DIY Application
Dull is out.
Graphene is in.
Drag to compare.
V2.0 to V3.0
What changed in Graphene Matrix V3.0
V3.0 takes over from V2.0. Same easy hand application, rebuilt chemistry, more time to level, and a 24-hour wait before water instead of 48.
| Graphene Matrix V2.0 | Graphene Matrix V3.0 | |
|---|---|---|
| Formula | rGO resins and silicates | Rebuilt from the ground up on reduced Graphene Oxide (rGO), 40% solids, low-VOC slower-flash solvent |
| Ready-to-buff cue | Rainbow turns to haze in about 2 to 3 minutes | Sweats and beads up in 1 to 3 minutes |
| Time between coats | 1 hour minimum | 15 minutes, up to 3 coats in 24 hours |
| Cure | Keep it dry at least 48 hours (drivable during the cure) | Drive after 2 hours, keep it dry for 24 hours |
| Rated durability | 5+ years of protection | 5 years, rated for 1,000+ washes in internal wash-cycle testing |
How to apply V3.0
One panel at a time, at 65-75°F out of direct sun.
-

Prep is everything: wash, iron-remove and clay every panel until it feels like glass.
-

Polish out what you don't want sealed in, then wipe every panel with Detox.
-

Shake the bottle and wet the applicator with a line of drops.
-

Wipe on a 2ft x 2ft section in straight, overlapping passes. Keep it wet.
-

In 1-3 minutes it sweats and beads up. Level with a plush towel, flip and buff, inspect with a light.
Science you can see.
Matrix 3.0 is built from the ground up on real reduced Graphene Oxide (rGO) that bonds to your paint as an ultra-slick, hard shield. Water flies off, dirt rinses away, and your car keeps that freshly detailed gloss for years, not weeks. Made in-house in real reactors, never white-labeled.
Choose your protection

- Rated durability
- 5 years
- Wash rating
- 1,000+ washes
- Water contact angle
- 115°+
- Resin load
- High-activity, 40% solids
- Gloss & slickness
- Glossy and slick
- Chemical resistance
- High
- Application
- Easiest
- Warranty
- Product warranty, register your VIN
- Sizes
- 30mL / 50mL
- Best for
- Enthusiasts, weekend cars

- Rated durability
- 10 years, ASTM tested
- Wash rating
- 5,000 washes
- Water contact angle
- 118°+
- Resin load
- Highest we make
- Gloss & slickness
- Highest Gloss, Ultra Slick
- Chemical resistance
- Maximum
- Application
- Easy
- Warranty
- 10-year, transferable
- Sizes
- 50mL / 100mL
- Best for
- The best protection, period
FAQs
Quick answers from the Ethos team.
What happened to Graphene Matrix V2.0?
Graphene Matrix V3.0 takes over from V2.0 in the lineup. It keeps the easy hand application and adds a rebuilt rGO formula, a longer working window and a 24-hour cure before water instead of 48. Coating over V2.0? Strip it first: polish, then wipe with Detox.
Why graphene instead of a ceramic coating?
Graphene adds what ceramic alone can't: lower static so the surface attracts less dust, better heat stability, and a finish that's less prone to water spotting. Matrix 3.0 is rGO built from the ground up, not a ceramic with graphene stirred in, so you get hardness and chemical resistance along with graphene's slickness and gloss.
What is rGO, and why does it matter?
Graphene on its own can't form a coating, so we refine it into reduced Graphene Oxide (rGO) and graft it into the coating film. That's what delivers the anti-static, heat-stable, water-spot-resistant surface. Most "graphene" coatings are ceramic with powder stirred in. See the full science of Graphene Matrix.
Is Matrix 3.0 OK for my first coating?
Yes. Graphene coatings carry a far lower risk of permanent high spots than traditional ceramics. Prep well, work one section at a time, and inspect as you go.
How long does it last?
Rated for 5 years and 1,000+ washes in internal wash-cycle testing, with proper maintenance.
Which size do I need?
1 Car (30mL) covers most coupes and sedans at one coat. Truck/SUV (50mL) is sized for larger vehicles, or a sedan with multiple coats. The Complete Kit includes everything you need for prep, application and maintenance, and is our best value.
What surfaces can I coat?
Any painted, plastic or glass surface, including the windshield.
How soon can I drive or get it wet?
Drive after 2 hours. Keep it away from water and rain for 24 hours. The coating keeps hardening over the next several days, so keeping it dry longer only helps.
Can I layer it?
One coat gives full protection. To layer, wait at least 15 minutes after buffing before the next coat, and don't exceed 3 coats in 24 hours.
What causes high spots, and how do I avoid them?
Residue left on the panel. Level on time, flip to a clean towel face for a second pass, and check each panel from several angles with a flashlight. A cured high spot has to be polished off.
What temperature should I apply in?
65-75°F, out of direct sun, on a cool, clean, dry surface. Heat and humidity shorten the flash, so test a small section first.
What's the difference between Matrix 3.0 and PRO 3.0?
Same graphene platform, two levels of protection. Matrix 3.0 is rated 5 years / 1,000+ washes with deep gloss and extreme slickness. PRO 3.0 carries the highest resin load we make, rated 10 years / 5,000 washes with a 10-year warranty, built for daily drivers, wheels and hard use.













