EZ Pull Swivel Pressure Washer Gun
Pressure Washer Gun That Ends Hose Kinks and Hand Fatigue
Most pressure washer guns are an afterthought — a stiff trigger and a plastic body that fights you the whole wash. The EZ Pull Swivel Gun isn't. It's a pressure washer spray gun built for people who actually detail: a 360° swivel so your hose never kinks, an easy-pull trigger that won't wear out your hand, and stainless steel fittings that don't leak. It connects any pressure washer to your foam cannon, nozzles, or wand in seconds — and it's ready to run the moment you open the box.
KEY FEATURES
- 360° Recessed Swivel — your hose rotates freely instead of kinking, twisting, or dragging across your paint
- Easy-Pull Trigger — a fraction of the effort of a standard trigger gun, so you can wash longer without hand fatigue
- Nickel-Plated Brass + 304 Stainless Steel — leak-free, corrosion-resistant fittings where cheap guns fail first
- 4,000 PSI / 7 GPM — handles any electric or gas pressure washer, cold or hot up to 140°F
- Universal Fit — M22-14mm, M22-15mm, and 3/8" quick-connect adapters fit Ryobi, Sun Joe, Simpson, Craftsman, Generac, and more
- Foam Cannon Ready — 1/4" quick-connect outlet pairs instantly with the Foam Cannon Pro V2, lances, and nozzle tips
- Everything Included — M22 adapters, 3/8" quick-connect, 25° nozzle, and Teflon tape in the box
No more fighting your hose. Most pressure washer guns let the hose twist and kink every time you move around the car, dragging across your paint while you work. The 360° recessed swivel lets it rotate freely, so it stays out of your way — and off your finish. It's the difference between wrestling your equipment and just washing the car.
A trigger you can pull all day. The easy-pull trigger takes a fraction of the effort of a standard power washer gun. The difference shows up ten minutes into a full truck, when your hand still works. A built-in safety latch locks the trigger when you're not spraying, so there are no accidental blasts.
Built where cheap guns fail. Budget spray guns leak, corrode, and crack — usually right at the fittings. This one is built with nickel-plated brass and 304 stainless steel connectors in a high-strength nylon body with heat-dissipation venting. Rated to 4,000 PSI and 7 GPM and safe to 140°F, it stands up to daily detailing and hot-water machines alike.
Fits your pressure washer. The included M22-14mm, M22-15mm, and 3/8" quick-connect adapters make this a true universal pressure washer gun — it fits the vast majority of electric and gas machines, including Ryobi, Sun Joe, Simpson, Craftsman, and Generac. Connect your pressure washer hose to the inlet, snap your accessory onto the 1/4" quick-connect outlet, and you're ready to wash. Its short, maneuverable body makes quick work of wheel wells and tight panels.
The last piece of a safe wash. Snap on the Foam Cannon Pro V2, load Pure Shampoo, and you've got a true touchless pre-wash — thick foam that lifts grit off the paint before you ever make contact. That's how you wash a coated car without putting swirls back into the finish. The gun is the connection point that makes the whole wash system work.
More in the box than the other guys. Most pressure washer guns at this level make you buy the nozzle and adapters separately. This one comes complete — M22-14mm and M22-15mm adapters, a 3/8" quick-connect, a 25° nozzle, and Teflon tape — so it works with your setup straight out of the box. Pro swivel-gun features, without the pro markup.
WHAT'S IN THE BOX
- EZ Pull Swivel Gun
- M22-14mm & M22-15mm adapters
- 3/8" quick-connect plug
- 25° nozzle
- Teflon tape
SPECIFICATIONS
- Max pressure: 4,000 PSI
- Max flow: 7 GPM
- Max water temperature: 140°F
- Inlet: 3/8" quick-connect (M22-14mm & M22-15mm adapters included)
- Outlet: 1/4" female quick-connect
- Construction: nickel-plated brass, 304 stainless steel, high-strength nylon
FREQUENTLY ASKED QUESTIONS
How do I attach a foam cannon to the pressure washer gun? Your foam cannon connects to the gun's 1/4" quick-connect outlet — pull back the collar, insert the cannon's connector, and release. It's fully compatible with the Ethos Foam Cannon Pro V2 and standard 1/4" foam lances.
Will it fit my Ryobi, Sun Joe, or Simpson pressure washer? Yes. The included M22-14mm, M22-15mm, and 3/8" quick-connect adapters fit the vast majority of electric and gas pressure washers, including Ryobi, Sun Joe, Simpson, Craftsman, and Generac.
Can I connect this pressure washer gun to a garden hose? No — it's built for pressure washers only. A garden hose won't generate the pressure these fittings and a foam cannon need to work properly.
What PSI is it rated for? 4,000 PSI and 7 GPM, safe up to 140°F. For car detailing, water flow (GPM) matters more than maximum pressure — you want steady flow to rinse and foam safely, not maximum blast.
Why choose a swivel gun? Without a swivel, your hose twists and kinks every time you move around the car, fighting you and dragging across your paint. The 360° recessed swivel lets the hose rotate freely so it stays out of your way and off your finish.
Backed by a 1-year warranty and the Ethos 30-day money-back guarantee. Made for detailers.
Pressure Washer Gun That Ends Hose Kinks and Hand Fatigue
Most pressure washer guns are an afterthought — a stiff trigger and a plastic body that fights you the whole wash. The EZ Pull Swivel Gun isn't. It's a pressure washer spray gun built for people who actually detail: a 360° swivel so your hose never kinks, an easy-pull trigger that won't wear out your hand, and stainless steel fittings that don't leak. It connects any pressure washer to your foam cannon, nozzles, or wand in seconds — and it's ready to run the moment you open the box.
KEY FEATURES
- 360° Recessed Swivel — your hose rotates freely instead of kinking, twisting, or dragging across your paint
- Easy-Pull Trigger — a fraction of the effort of a standard trigger gun, so you can wash longer without hand fatigue
- Nickel-Plated Brass + 304 Stainless Steel — leak-free, corrosion-resistant fittings where cheap guns fail first
- 4,000 PSI / 7 GPM — handles any electric or gas pressure washer, cold or hot up to 140°F
- Universal Fit — M22-14mm, M22-15mm, and 3/8" quick-connect adapters fit Ryobi, Sun Joe, Simpson, Craftsman, Generac, and more
- Foam Cannon Ready — 1/4" quick-connect outlet pairs instantly with the Foam Cannon Pro V2, lances, and nozzle tips
- Everything Included — M22 adapters, 3/8" quick-connect, 25° nozzle, and Teflon tape in the box
No more fighting your hose. Most pressure washer guns let the hose twist and kink every time you move around the car, dragging across your paint while you work. The 360° recessed swivel lets it rotate freely, so it stays out of your way — and off your finish. It's the difference between wrestling your equipment and just washing the car.
A trigger you can pull all day. The easy-pull trigger takes a fraction of the effort of a standard power washer gun. The difference shows up ten minutes into a full truck, when your hand still works. A built-in safety latch locks the trigger when you're not spraying, so there are no accidental blasts.
Built where cheap guns fail. Budget spray guns leak, corrode, and crack — usually right at the fittings. This one is built with nickel-plated brass and 304 stainless steel connectors in a high-strength nylon body with heat-dissipation venting. Rated to 4,000 PSI and 7 GPM and safe to 140°F, it stands up to daily detailing and hot-water machines alike.
Fits your pressure washer. The included M22-14mm, M22-15mm, and 3/8" quick-connect adapters make this a true universal pressure washer gun — it fits the vast majority of electric and gas machines, including Ryobi, Sun Joe, Simpson, Craftsman, and Generac. Connect your pressure washer hose to the inlet, snap your accessory onto the 1/4" quick-connect outlet, and you're ready to wash. Its short, maneuverable body makes quick work of wheel wells and tight panels.
The last piece of a safe wash. Snap on the Foam Cannon Pro V2, load Pure Shampoo, and you've got a true touchless pre-wash — thick foam that lifts grit off the paint before you ever make contact. That's how you wash a coated car without putting swirls back into the finish. The gun is the connection point that makes the whole wash system work.
More in the box than the other guys. Most pressure washer guns at this level make you buy the nozzle and adapters separately. This one comes complete — M22-14mm and M22-15mm adapters, a 3/8" quick-connect, a 25° nozzle, and Teflon tape — so it works with your setup straight out of the box. Pro swivel-gun features, without the pro markup.
WHAT'S IN THE BOX
- EZ Pull Swivel Gun
- M22-14mm & M22-15mm adapters
- 3/8" quick-connect plug
- 25° nozzle
- Teflon tape
SPECIFICATIONS
- Max pressure: 4,000 PSI
- Max flow: 7 GPM
- Max water temperature: 140°F
- Inlet: 3/8" quick-connect (M22-14mm & M22-15mm adapters included)
- Outlet: 1/4" female quick-connect
- Construction: nickel-plated brass, 304 stainless steel, high-strength nylon
FREQUENTLY ASKED QUESTIONS
How do I attach a foam cannon to the pressure washer gun? Your foam cannon connects to the gun's 1/4" quick-connect outlet — pull back the collar, insert the cannon's connector, and release. It's fully compatible with the Ethos Foam Cannon Pro V2 and standard 1/4" foam lances.
Will it fit my Ryobi, Sun Joe, or Simpson pressure washer? Yes. The included M22-14mm, M22-15mm, and 3/8" quick-connect adapters fit the vast majority of electric and gas pressure washers, including Ryobi, Sun Joe, Simpson, Craftsman, and Generac.
Can I connect this pressure washer gun to a garden hose? No — it's built for pressure washers only. A garden hose won't generate the pressure these fittings and a foam cannon need to work properly.
What PSI is it rated for? 4,000 PSI and 7 GPM, safe up to 140°F. For car detailing, water flow (GPM) matters more than maximum pressure — you want steady flow to rinse and foam safely, not maximum blast.
Why choose a swivel gun? Without a swivel, your hose twists and kinks every time you move around the car, fighting you and dragging across your paint. The 360° recessed swivel lets the hose rotate freely so it stays out of your way and off your finish.
Backed by a 1-year warranty and the Ethos 30-day money-back guarantee. Made for detailers.