Two-Step Paint Correction Kit - (Cut + Finish)
- Complete cut-to-finish system : Pure Cut removes, Perfect Polish refines to clarity.
- Predictable results : microfiber + foam sequence yields coating-ready finishes.
- Efficient working cycles : long work time with low dust and consistent wipe-off.
- For bigger jobs : ideal for moderate–heavy defects and full restorations.
Full correction: cut the defects, finish to a showcar gloss
The Two-Step Correction Kit pairs Pure Cut for fast defect removal with Perfect Polish for high-clarity finishing. Dialed pad pairings make the process predictable on most clears with a DA polisher.
What’s inside
- Pure Cut (16 oz) + Perfect Polish (16 oz)
- Pads: MF Cutting (ETH-MCP-5) ×2, Orange (ETH-OPP-5) ×2, Black (ETH-BFP-5) ×1
- Towels: Plush 470 – Gray ×3
Why it works
- Step 1: Microfiber + Pure Cut to level moderate/heavy swirls and RIDS.
- Step 2: Orange + Perfect Polish to refine; optional jewel with black pad.
- Low dust, easy wipe-off so you can move quickly panel to panel.
How to use
- Decon wash & clay; tape sensitive trim.
- Cut: MF + Pure Cut, speed 4–5, moderate pressure, 2–3 section passes; wipe.
- Finish: Orange + Perfect Polish; reduce pressure for final slow pass; wipe.
- Optional: Black pad + a small amount of Perfect Polish to jewel.
- Panel-wipe and protect with Resist or your ceramic coating.
Good to know
- Not for matte/satin paint or PPF. Always test a small section first.
- Deep through-clear scratches won’t fully remove by polishing alone.
Full correction: cut the defects, finish to a showcar gloss
The Two-Step Correction Kit pairs Pure Cut for fast defect removal with Perfect Polish for high-clarity finishing. Dialed pad pairings make the process predictable on most clears with a DA polisher.
What’s inside
- Pure Cut (16 oz) + Perfect Polish (16 oz)
- Pads: MF Cutting (ETH-MCP-5) ×2, Orange (ETH-OPP-5) ×2, Black (ETH-BFP-5) ×1
- Towels: Plush 470 – Gray ×3
Why it works
- Step 1: Microfiber + Pure Cut to level moderate/heavy swirls and RIDS.
- Step 2: Orange + Perfect Polish to refine; optional jewel with black pad.
- Low dust, easy wipe-off so you can move quickly panel to panel.
How to use
- Decon wash & clay; tape sensitive trim.
- Cut: MF + Pure Cut, speed 4–5, moderate pressure, 2–3 section passes; wipe.
- Finish: Orange + Perfect Polish; reduce pressure for final slow pass; wipe.
- Optional: Black pad + a small amount of Perfect Polish to jewel.
- Panel-wipe and protect with Resist or your ceramic coating.
Good to know
- Not for matte/satin paint or PPF. Always test a small section first.
- Deep through-clear scratches won’t fully remove by polishing alone.
FAQ
Compound first to remove defects, then polish to refine — the process that produces coating-ready paint.
Moderate to heavy defects, full restorations, and anyone prepping for a long-term coating.
Pure Cut and Perfect Polish plus the pads for both stages.
Yes. A dual-action polisher with a 5 inch backing plate.
Plan on a full day for an average vehicle. Two stages on every panel is real work.