RESIST is a graphene-ceramic spray coating you apply at home for $53.00: spray a clean, cool panel, spread it, then buff with a second towel. In Project Farm's 8-coating test it finished with the least sponge drag after 5 harsh chemicals: 2.3 lb, against 3.3 lb on bare paint.
Owners report it still beading after 9 months of washes. Apply in 20 minutes. Drive in the rain the same hour. No cure time, no streaks, no regrets.
Most hydrophobic sprays fail on the same three things. RESIST exists because it was engineered around all three.
A little goes a long way: one bottle covers 3 to 4 average vehicles top to bottom, so the bead test is not a one-panel stunt.
Insta-Bondâ„¢ chemistry bonds on contact with clear coat. Get caught in a downpour 20 minutes after applying: no issue.
Graphene oxide interlocks with the paint. It doesn't wash off like SiOâ‚‚-only sprays. Annual top-up for peak bead.
Wash the vehicle and remove residue before applying RESIST. Work on a cool surface out of direct sunlight.
A clean panel helps the product spread evenly and makes the finished water behavior easier to judge.
Shake RESIST and apply a small amount to the surface or a fresh microfiber.
Spread the product evenly over one manageable area rather than flooding the panel.
Use a second fresh microfiber to remove remaining residue. Inspect from more than one angle before moving on.
The finish should look clear and glossy without visible high spots or streaks.
Clean the paint with any car wash soap. Dry fully.
~15 minShake. Spray a light mist onto a clean microfiber.
~30 secSpread across the panel. Watch the surface turn glass-slick.
3–5 min / panelFlip the microfiber. Buff to a deep, reflective gloss.
1–2 min / panelAfter following the current water-exposure directions, observe bead shape and how water moves from the panel.
Use the result as a practical check of the hydrophobic finish on that vehicle and application.
"Black F150. Was paying $600 twice a year for pro ceramic. Nine months on RESIST and the water still beads like day one."
"I own a detail shop. This lays down a more even coat than most pro products. There's no race against cure time."
"Windshield beading at highway speed. Barely need wipers in light rain. Most underpriced thing I've bought for a car."
Washing, storage, exposure, and maintenance products all affect the surface over time.
Use coating-safe care and inspect the finish during normal washes.
One-vehicle start. The bead test on your own car.
Three bottles for less than two singles. Coat every car in the driveway.
Eight times the 16oz volume for shops, fleets and enthusiasts.
The current listing offers a 16oz bottle at $34.95, a three-bottle option, and a gallon.
Start with one bottle for one vehicle or choose more volume for repeat use.
Yes. With 2 layers on properly prepped paint, Ethos rates RESIST at 12+ months. Reapply once a year for peak hydrophobicity.
Yes. RESIST is a top-tier maintenance topper for tired pro coatings. It rebuilds hydrophobicity and extends the life of whatever's underneath.
Same bottle. Highway-speed rain repellency on windshields is one of the benefits owners mention most.
Yes. Insta-Bondâ„¢ technology bonds on contact, so there's no cure window. Rain, wash, drive, no problem.
RESIST can provide standalone spray protection or maintain an existing coating. Apply it after the surface is clean.
Use DEFY first when you need to remove light contamination without a hose.
Most sprays are long gone by then. RESIST is rated for 12+ months when applied and maintained as directed. Wash it, drive it, park it in the rain, and watch.
If the spray, spread, and buff routine fits your car care, compare the current sizes and kit contents.
Unopened items can be returned within 30 days, and anything that arrives damaged or defective is replaced or refunded.