Highly refined formula provides incredible weather, chemical and UV protection for any surface.
Designed to be applied without the need for any professional equipment or experience.
One of the most researched coatings on the market with SGS Verified 9H Hardness & Boeing Accreditation.
Proprietary resins and additives create a stunningly rich non-stick finish that lasts for 3+ years.
The Next Level In Ceramics
Ceramic Matrix Coating is the latest evolution of ceramic technology. Ceramics (Sio2) have been studied and refined over the years, making them one of the most trusted forms of protection on the market. Ceramic Matrix offers an incredible balance of performance and value, making it our best iteration yet.
Unique Ceramic Chemistry
Ceramic Matrix forms a hard crystalline barrier that provides incredible weather, chemical, and UV protection on any surface. This DIY (Do-It-Yourself) coating adds diamond-like shine to your vehicle while making washing & maintenance easier than ever!
3+ Years of Protection
Ceramic Matrix is comprised of the highest quality Si02 resins and additives that imparts an incredibly resistant and repellent coating on any surface. These proprietary ingredients work to create a stunningly rich, non-stick finish that doesn't fade or dull for 3 or more years. Ceramic Matrix Coating does not wash away like a typical wax or sealant. This means that just one application will provide you with all the protection your vehicle needs.
Third-Party Tested and Accredited
Designed to be the finest Ceramic Coating on the market, Ceramic Matrix has been certified to perform even through some of the most rigorous testing in the world. Independently tested and certified by the globally recognized SGS Swiss Laboratories for chemical resistance, hydrophobic contact angles and 9H Hardness (ASTM D3363 Film Hardness).
Approved by Boeing™ for passing its rigorous testing for corrosion, embrittlement and paint softening resistance, certifying it for use in the Aerospace industry.
In house ASTM standardized testing (including but not limited to): QUV (accelerated weather testing) and Elcometer abrasion testing all place Ceramic Matrix at the top of its class.
Affordable DIY Application
Ceramic Matrix is designed to be applied without the need for any professional equipment or experience. We recommend using our Utility Towel and Ceramic Coating Applicator to ensure effortless application.
How to Prep for Application
Clean any loose dust, dirt, and contaminants from the surface.
Clay bar any rough embedded contaminants from the surface to ensure no impurities interfere with the coating's properties.
Polish/Compound to remove any paint defects in the form of scratches, swirl marks, and oxidation. Ceramic Matrix is a semi-permanent coating so once applied any defects will remain sealed underneath.
Deep clean any polish oils or residues from the surface that could inhibit the bonding process using Ethos Detox.
Remove any residual water that can be hiding underneath panel gaps, headlights, or taillights which could drip out and affect the coatings curing process.
Temperature and humidity can play a big factor in “flash” time (Time between application and when the coating is ready to be wiped off). We recommend applying in temperatures between 65-75*. In higher temperatures flash time will be expedited so first, test using a small section to determine workability before moving onto the rest of the vehicle.
Ceramic Matrix can be applied to any painted, plastic or glass surface (including windshield).
How To Apply
Make sure the surface has been completely cleaned and decontaminated with Ethos Detox. The cleaner the surface, the better the bond!
Shake bottle well.
Apply a few drops of Ceramic Matrix onto your applicator until evenly covered.
Starting with horizontal / top surfaces first, applying in straight lines slightly overlapping from one line to the next. Work in small areas approximately 3'x3' or the size of a door or half a hood at a time. Temperature and humidity will determine coverage areas allowable between application and removal.
Applicators should glide smoothly on the surface while laying down an even layer of coating. If the applicator starts to drag or the application becomes inconsistent, apply additional drops to the applicator.
Immediately after application, you will notice a “Rainbow Effect” (More prevalent on dark colors) while the applied coating bonds to the surface. Allow the coating to cure for roughly 1-2 min after application or until the "Rainbowing" begins to fade. (Do Note: Temperature and humidity will expedite the flash time. Test a small area first before continuing onto the rest of the vehicle)
Using premium microfiber towels (Preferably our Utility Towels), thoroughly wipe down the section to remove the Ceramic Coating residue. Your first wipe should remove about 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal. The coating should still feel wet and slick during wipe off and not hard or tacky. If the coating is tacky or rough during wipe off, you waited too long before leveling.
IMPORTANT: Be sure to check adjacent panels to make sure you haven't "pushed" excess coating to other areas. (We recommend using a flashlight or smartphone light for inspection to make sure every bit of residue is gone. If you fail to remove all of the residue during the flash time, it will become a dark spot once it cures and can require polishing or compounding to remove) So be thorough and continue to check your work before moving onto the next step.
Repeat these steps as you move along the rest of your vehicle. Coating the paint, plastics, trim and glass surfaces in the same manner.
If you desire to layer the coating for additional performance wait approximately 1 hour between applications.
Let the coating fully dry/cure for at least 48 hours before allowing it to get wet. The longer it stays dry the better, as it will continue to cure for about 5 days (you CAN drive the car during this time).
Wash and maintain the coating as outlined in our maintenance protocols. www.ethoscarcare.com/coating-maintenance
Graphene Matrix represents our latest evolution in graphene coating technology and is our most premium coating option currently available. We were able to develop Graphene Matrix into a reality thanks to the extensive R&D testing and formulations that went underway during our development of our pioneering Ceramic Coating - Ceramic Matrix 9H.
Ceramic Matrix offers incredible performance in an easy to use formula that is entirely comprised of sio2 nano-particles. It is our best Ceramic Based protective coating offering up to 3+ years of performance per application while being offered at an unbeatable price for its performance.
Ounce per ounce, Ceramic Matrix offers the best value of any ceramic coating in the world.
Ceramic Matrix is applied like any traditional ceramic coating to a properly prepared surface. Once the surface has been cleaned and decontaminated or polish, you apply Ceramic Matrix using the included applicator in straight line motions. Unlike other coatings, there is no need for infrared curing lamps or special tools to install.
Ceramic Matrix 9H can be applied to your paint, plastics, wheels, glass, chrome, headlight & tail lights. It can even be apply to gel coat, RV’s, Boats, ATV’s, Motorcycles and much more!
Once Ceramic Matrix cures it hardens to form a tough barrier on top of your vehicles finish. This barrier will repel dust, dirt and contaminants while protecting from UV rays, water spotting, bird droppings and much more. This repellant layer will reject waxes and other products that arent designed to be used in conjunction with a ceramic based coating.
For maintenance of Ceramic Matrix, we recommend using our Ceramic Refresh and Ceramic Shampoo products.
Thanks to the incredible hydrophobic properties of Ceramic Matrix, maintenance and cleaning is extremely easy!
We specially designed our products to work together with similar chemistries so that there was no guesswork involved.
For optimal performance we recommend hand washing with our Ceramic Shampoo and topping with Defy or Ceramic Refresh.
Yes! Ceramic Matrix was third party certified to be “9H” by the prestigious SGS swiss laboratories. This is not an easy feat and something we are proud to offer with our Ceramic Matrix coating.
Ceramic Matrix has been put through extensive testing to validate its ongoing performance. We are proud to say that it is one of the most (if not the most) tested coating on the market.
Both real world and accelerated weather testing was conducted to show Ceramic Matrix to offer at least 3 years of ongoing performance per application on a daily driven vehicle.
Yes, In fact we recommend applying two layers of Ceramic Matrix approximately 1-2 hours apart. This further increases the gloss, shine and protective abilities of the coating.
Ceramic Matrix Can be used on paint, glass, plastics, wheels, trim, powder coat, satin/matte finishes, gel coat and more!
Ceramic Matrix offers an unbeatable combination of performance and price while undergoing some of the most extensive testing and performance validation to certify its performance. Unlike some Ceramic Coatings on the market, there is no need for special tools, equipment or experience to apply. In addition, our chemistry paired maintenance products makes cleaning and maintaining the coating extremely easy without any guesswork involved.
We are confident that our Ceramic Matrix coating is one of the finest ceramic coatings available on the market.
Got this about 4 months ago. I waited till the time was right. Took my time to correct the paint and it was worth it. Easy to use with awesome results. I have another 50ml of ceramic and another 50ml of the Graphene. Just got my wife a Bronco sport and it had to be Black so will be putting on the Graphene on hers.
We're using "Resist" and "Ceramic Matrix Coating"; they both seem to be doing a great job, thus far...
I must say this product does more than what its supposed to. An easy buff off and a fine glossy mirror finish.
Haven't used ceramic matrix yet but if it's as durable as Graphene matrix I will be pleased
Product was easy to apply and remove compared to other ceramic coatings. The initial shine was good. Not had my first wash yet, but good initial thoughts on the product. Used on a pearl white car and the white really pops after application. Can't wait to see how it holds up!!