Graphene Matrix Coating: In-Depth Installation
We discuss applying our Graphene Matrix Coating in higher temperatures and humidities!
Ethos Graphene Matrix coating is an extremely versatile, easy to use coating that can be applied to any painted, glass or plastic surface. When applied it forms a semi permanent barrier protecting your vehicle from oxidation and environmental damage for 5 or more years.
When preparing your vehicle for application it is important to remember to clean the surface using Ethos Detox prior to application to give the coating an optimal bond to the substrate.
Upon application of the coating you will notice the "rainbowing" effect take place as the graphene goes to work bonding to the finish. Shortly after application this 'rainbowing' effect will turn to a haze or fog meaning that the coating is ready to be removed. With high quality microfiber towels, completely remove the residue from the surface ensuring that there is no residue left behind. (Working in higher temperatures or environments will accelerate this flash time, so we do recommend performing a small test section before proceeding to the rest of the vehicle.
Repeat the steps along the rest of the vehicle working from one panel to the next until all your painted, glass, plastic and trim surfaces have been protected.
For additional protection and a more uniform coating, apply a second layer at a minimum of 1 hour after the first.
Wash and maintain using Ethos Ceramic Shampoo and Ethos Defy for additional shine, slickness and ongoing protection.